Features:-
The Instrument basically consists of a Miniature Furnace with Automatic Ramp Rate of Heating, Microprocessor Controlled, when “Start” key is pressed, heating starts. There is Auto detection of Opto-coupled Infra-Red transmission system, when sample melts, photodiode detects the signal and Melting Temperature put on hold latched on display automatically. The Furnace becomes off and the cooling fan ON automatically. The instrument gives audio & visual indications, on reaching the temperature at which the sample melts.
Technical Specifications:-
Temp. Range | Ambient to 350ºC |
Display | 128 X 64 Graphical LCD |
Resolution | 0.1ºC |
Temp. Sensor | Grade “A” PT-100, Platinum Sensor |
Sample Capacity | 3 Samples, Capillary Dimension 1.4 mm |
Application Area | Miniature Furnace Module |
Application | Suitable for Melting Point only |
Temp. Control & Ramp Rate Heating | Microprocessor controlled closed loop PID, Auto
Adjustable Ramp Rate Heating 2ºC to 10ºC/minute by UP/ DOWN keys, can be increased or decreased during running / operation |
Operation | Auto determination of Melting Point for all 3 Samples separately |
Application Area | Miniature Furnace Module |
PC Interface | USB to PC |
Power Supply | 230 V ± 10% AC, 50 Hz. |
Dimension | 270X330X145 mm (LXBXH) |
Weight | 8 KG |
The Melting Temp. of the sample remain displayed on the panel till the “RESET” switch is operated.
OPERATION: Fully Automatic “Sample Fill and Forget”: All the selection of programming is fully protected from power failure including “HOLD” action of melting temperature. Once the start action is initiated, it will reach to find out the melting point of sample.
Opto-coupled I.R. Transmission based. Only Crystalline sample (Sample required to be transparent at the time of melting, not Suitable for Dark Colored Samples).
Reviews
There are no reviews yet.